Dynamic Modeling of 2D Nano-Manipulation based on Atomic Force Microscopy in Liquid Medium and Studying the Hydrodynamic and Geometric Parameters of the Model

Document Type : Original Article (s)

Authors

1 Professor, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

2 Department of Mechanical Engineering, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

Abstract

Background: Dynamic behaviors of probe tip and nanoparticles have been investigated by modeling the manipulation of nanoparticles in the air using atomic force microscopy (AFM) as a nano manipulator. This study evaluated the manipulation of submerged nanoparticles in liquid environment.Methods: The artificial nanoparticle manipulation was analyzed by theoretical analysis of forces in liquids and dynamics of spherical nanoparticle pushing. Hydrodynamic drag force and surface tension of the liquid were then calculated and used in the new dynamic modeling. The problem was simulated for a gold nanoparticle on a silicon substrate in water.Results: The results showed that the required manipulation force and time for nanoparticle sliding and rolling increased by respectively 7% and 3% in water as compared to the air. Moreover, for various submerged lengths of the cantilever in water, the critical values related to sliding and rolling were delayed for 9% and 10.5%, respectively.Conclusion: The required critical force and time for the manipulation in water showed a little increase over the existing values for air.

Keywords

References

  1. Sitti M, Hashimoto H. Force controlled pushing of nanoparticles: modeling and experiments. Proceedings of IEEE/ASME International Conference. 1999.
  2. Tafazzoli A, Sitti M. Dynamic Behavior and Simulation of Nanoparticle Sliding During Nanoprobe-Based Positioning. Proceedings of International Mechanical Engineering Congress and Exposition. 2004 November 13 – 19; Anaheim, California; 2004. p. 965-72.
  3. Habibnejad Korayem M, Zakeri M. Sensitivity analysis of nanoparticles pushing critical conditions in 2-D controlled nanomanipulation based on AFM. The International Journal of Advanced Manufacturing Technology 2009; 41(7-8): 714-26.
  4. Resch R, Lewis D, Meltzer S, Montoya N, Koel BE, Madhukar A, et al. Manipulation of gold nanoparticles in liquid environments using scanning force microscopy. Ultramicroscopy 2000; 82(1-4): 135-9.
  5. Frank BP. Intermolecular Forces of Marine Adhesive Molecules. [PhD Thesis]. New York, NY: Rensselaer Polytechnic Institute; 2001.
  6. Jones RE, Hart DP. Force interactions between substrates and SPM cantilevers immersed in fluids. Tribology International 2005; 38(3): 355-61.
  7. Gauthier M, Regnier S, Rougeot P, Chaillet N. Forces analysis for micromanipulations in dry and liquid media. Journal of Micromechatronics 2006; 3(3-4): 389-413.
  8. Gauthier M, Nourine M. Capillary Force Disturbances on a Partially Submerged Cylindrical Micromanipulator. IEEE Transactions on Robotics 2007; 23(3): 600-4.
  9. Israelachvili JN. Intermolecular and surface forces. 2nd ed. New York, NY: Academic Press; 2007.
Journal of Isfahan Medical School
Volume 29, Issue 174 - Serial Number 174
November and December 2011
Pages 3168-3177

Files

History

  • Receive Date: 10 August 2011
  • Revise Date: 01 November 2024
  • Accept Date: 06 April 2022

Share

How to cite

Statistics