نوع مقاله : مقاله های پژوهشی
نویسندگان
1
دانشجوی کارشناسی ارشد، گروه فیزیک و مهندسی پزشکی، دانشکدهی پزشکی و کمیتهی تحقیقات دانشجویی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
2
استادیار، گروه فیزیک و مهندسی پزشکی، دانشکدهی پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
3
دانشیار، گروه قلب، دانشکدهی پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
4
استادیار، گروه رادیولوژی، دانشکدهی پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
چکیده
مقدمه: بیماریهای قلبی- عروقی از دلایل عمدهی مرگ و میر در جهان به حساب میآیند. سالیانه بیش از 17 میلیون نفر در سراسر جهان بر اثر ابتلا به بیماریهای قلبی و عروقی از بین میروند که این آمار در حدود یک سوم از کل موارد مرگ را تشکیل میدهد. لزوم استفاده از روشهای غیرتهاجمی یا با خطر کمتر در تشخیص و درمان بیماری، به جای روشهای تهاجمی کنونی ملموس است؛ چرا که گرفتگی عروق قلبی حرکت و فعالیت عضلات قلب را تحت تأثیر قرار میدهد. در این پژوهش سعی شد تا میدان حرکتی بطن چپ قلب با استفاده از توالیهای تصاویر سیتی اسکن Multislice (Multislice computerized tomography یا MCT) و مدل فرم پذیر جهت تمایز نواحی سالم و بیمار بطن چپ قلب استخراج گردد.روشها: برای شبیهسازی از نرمافزار MATLAB استفاده شد و مدل فرم پذیر مورد استفاده، مدل Active mesh میباشد. تصاویر قلبی MCT، کوتاهمحور (Short axis) و تقطیع گردید. سپس، مدل با استفاده از شاخصهای دینامیکی عضلهی قلب و اطلاعات ناشی از تقطیع تصاویر تغییر شکل داده شد. در نهایت، میدان متراکم با درونیابی خطی از مدل استخراج گردید و به حالت استاندارد Bull’s eye به نمایش درآمد.یافتهها: دقت و حساسیت الگوریتم مورد استفاده در استخراج میدان حرکتی بر اساس آستانه گذاری نمایش Bull’s eye و تطابق آن با نتایج کلسیم اسکر به ترتیب 70 و 71 درصد بود. این نتایج به طور کلی با شواهد کلینیکی سازگاری داشت.نتیجهگیری: نتایج نشان داد که استخراج میدان حرکتی متراکم قلبی مبتنی بر مدل فرم پذیر Active mesh روشی سازگار با نتایج کلینیکی و امید بخش در کمک به تشخیص بیماریهای قلبی میباشد.
کلیدواژهها
عنوان مقاله English
Heart Motion Estimation Using a Deformable Model and Multislice Computerized Tomography Images
نویسندگان English
Hassan Khajehpour
1
Saeid Kermani
2
Mohamad Hashemi
3
Mahdi Karami
4
1
MSc Student, Department of Biomedical Engineering, School of Medicine AND Student Research Committee, Isfahan University of Medical Sciences, Isfahan, Iran
2
Assistant Professor, Department of Biomedical Engineering, School of Medicine, Isfahan University of Medical Sciences, Isfahan, Iran
3
Associate Professor, Department of Cardiology, School of Medicine, Isfahan University of Medical Sciences, Isfahan, Iran
4
Assistant Professor, Department of Radiology, School of Medicine, Isfahan University of Medical Sciences, Isfahan, Iran
چکیده English
Background: Cardiovascular diseases are the main cause of dead in the world. More than 17 million persons die because of heart abnormalities annually. Using noninvasive or low-risk methods instead of invasive and high-risks is necessary. As heart motion is affected by vascular occlusion, in this study heart dense motion field was extracted using a deformable model and multislice computerized tomography (MCT) images to distinguish between heart motion abnormal and normal regions.Methods: MATLAB software was used for simulations and the applied deformable model was active mesh model. The MCT images were turned to short axis images and then segmented. Lastly, the dense motion field of heart was extracted and shown in the standard Bull’s eye form.Findings: The accuracy and sensitivity of extracted dense motion field results, shown in the Bull’s eye form, in comparison with cardiac calcium score results were 70, 71 percent, respectively.Conclusion: Results show that the heart dense motion field extracted using active mesh model is a consistence and promising feature to help diagnosing of heart diseases.
کلیدواژهها English
Heart motion field
Deformable model
Active mesh model
Image processing
Multislice computerized tomography