مجله دانشکده پزشکی اصفهان

مجله دانشکده پزشکی اصفهان

بررسی اثر پوشش‌دهی بور بر پاسخ بافتی اباتمنت‌های ایمپلنتی زیرکونیایی: یک مطالعه‌ی آزمایشگاهی

نوع مقاله : مقاله های پژوهشی

نویسندگان
1 گروه پروتزهای دندانی، دانشکده‌ی دندان‌پزشکی، مرکز تحقیقات دندان‌پزشکی، دانشگاه علوم پزشکی همدان، همدان، ایران
2 گروه مهندسی مواد، دانشکده مهندسی، دانشگاه بوعلی‌سینا، همدان، ایران
3 گروه علوم پایه، دانشکده دامپزشکی، دانشگاه بوعلی سینا، همدان، ایران
4 مرکز تحقیقات علوم سلامت، گروه آمار زیستی، دانشکده بهداشت، دانشگاه علوم پزشکی همدان، همدان، ایران
10.48305/jims.v44.i864.0846
چکیده
مقدمه: اباتمنت‌های زیرکونیا به دلیل زیست‌سازگاری مطلوب و خواص زیبایی برتر، به طور گسترده در پروتزهای دندانی استفاده می‌شوند. هدف از مطالعه‌ی حاضر، ارزیابی تأثیر پوشش بور بر پاسخ بافتی اباتمنت‌های ایمپلنت زیرکونیا با استفاده از یک مدل حیوانی بود.
روش‌ها: در این مطالعه‌ی تجربی، اباتمنت‌های زیرکونیا با و بدون پوشش بور در خرگوش‌های نیوزیلندی کاشته شدند. پس از یک دوره بهبودی پنج هفته‌ای، بافت‌های اطراف اباتمنت جمع‌آوری و از نظر تعداد سلول‌های التهابی، از جمله لنفوسیت‌ها، ماکروفاژها و نوتروفیل‌ها، از نظر هیستوپاتولوژی ارزیابی شدند. مورفولوژی سطح و ویژگی‌های شیمیایی پوشش بور با استفاده از میکروسکوپ الکترونی روبشی (SEM) و طیف‌سنجی فوتوالکترون اشعه ایکس (XPS) ارزیابی شد. داده‌ها با استفاده از روش‌های آماری مناسب تجزیه و تحلیل شدند.
یافته‌ها: نتایج نشان داد که تعداد لنفوسیت‌ها در گروه کنترل (اباتمنت‌های بدون پوشش) به طور قابل توجهی بیشتر از گروه پوشش داده شده با بور بود (0/001 > P). به طور مشابه، تعداد ماکروفاژها در گروه کنترل به طور قابل توجهی بیشتر از گروه پوشش داده شده با بور بود (0/001 > P). در مقابل، هیچ تفاوت آماری معنی‌داری بین دو گروه از نظر تعداد نوتروفیل مشاهده نشد (0/052 = P). این یافته‌ها نشان‌دهنده‌ی افزایش زیست‌سازگاری و کاهش بالقوه خطر پری ایمپلنتیت در گروه پوشش داده شده با بور است.
نتیجه‌گیری: پوشش بور، با افزایش خواص سطحی و کاهش پاسخ‌های التهابی بافت، پتانسیل قابل توجهی را به عنوان یک رویکرد نوآورانه برای بهبود طراحی پایه‌های ایمپلنت زیرکونیا نشان می‌دهد. مطالعات طولانی‌مدت و بالینی بیشتر برای تأیید و گسترش این یافته‌ها ضروری است.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Evaluation of the Effect of Boron Coating on the Tissue Response of Zirconia Implant Abutments: An In Vitro Study

نویسندگان English

Arash Shisheian 1
Fariborz Vafaee 1
Hamid Esfahani 2
Mohammad Babaei 3
Samira Rezaei Moghaddam 2
Maryam Farhadian 4
Fatemeh Ataei 1
1 Department of Prosthodontics, School of Dentistry, Dental Research center, Hamedan University of Medical Sciences, Iran
2 Department of Materials Engineering, Faculty of Engineering, Bu-Ali Sina University, Hamedan, Iran
3 Department of Basic Science, Faculty of Veterinary Medicine, Bu-Ali Sina University, Hamedan, Iran
4 Research Center for Health Science, Department of Biostatistics, School of Public Health, Hamedan University of Medical Sciences, Hamedan, Iran
چکیده English

Background: Zirconia abutments are widely used in dental prosthetics due to their favorable biocompatibility and superior esthetic properties. The present study aimed to evaluate the effect of a boron coating on the tissue response of zirconia implant abutments using an animal model.
Methods: In this experimental study, zirconia abutments with and without a boron coating were implanted in New Zealand rabbits. After a five-week healing period, peri-abutment tissues were harvested and histopathologically evaluated for the number of inflammatory cells, including lymphocytes, macrophages, and neutrophils. The surface morphology and chemical characteristics of the boron coating were assessed using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Data were analyzed using appropriate statistical methods.
Findings: The results demonstrated that the number of lymphocytes in the control group (uncoated abutments) were significantly higher than that in the boron-coated group (P < 0.001). Similarly, the macrophage count was significantly greater in the control group than in the boron-coated group (P < 0.001). In contrast, no statistically significant difference was observed between the two groups in terms of neutrophil count (P = 0.052). These findings indicate enhanced biocompatibility and a potential reduction in risk of peri-implantitis in the boron-coated group.
Conclusion: Boron coating, by enhancing surface properties and reducing inflammatory tissue responses, shows considerable potential as an innovative approach for improving the design of zirconia implant abutments. Further long-term and clinical studies are warranted to confirm and expand upon these findings.

کلیدواژه‌ها English

Zirconia abutment
Boron coating
Tissue inflammation
Biocompatibility
Peri-implantitis
1.     Jafarian M, Iezadi M. Clinical Outcomes of Conventional and Immediate Placement of Dental Implants in a Group of Iranian War-wounded Patients. Avicenna J Dent Res 2012; 4(1): 16-27.
2.     Vishwakarma V, Kaliaraj GS, Amirtharaj Mosas KK. Multifunctional coatings on implant materials—A systematic review of the current scenario. Coatings 2022; 13(1): 69.
3.     Saini M, Singh Y, Arora P, Arora V, Jain K. Implant biomaterials: A comprehensive review. World Journal of Clinical Cases: WJCC. 2015;3(1):52.
4.     Ribeiro M, Monteiro FJ, Ferraz MP. Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions. Biomatter 2012; 2(4): 176-94.
5.     Kligman S, Ren Z, Chung C-H, Perillo MA, Chang Y-C, Koo H, et al. The impact of dental implant surface modifications on osseointegration and biofilm formation. J Clin Med 2021; 10(8): 1641.
6.     Rupp F, Gittens RA, Scheideler L, Marmur A, Boyan BD, Schwartz Z, et al. A review on the wettability of dental implant surfaces I: theoretical and experimental aspects. Acta Biomater 2014; 10(7): 2894-906.
7.     Sansone V, Pagani D, Melato M. The effects on bone cells of metal ions released from orthopaedic implants. A review. Clin Cases Miner Bone Metab 2013; 10(1): 34-40.
8.     Zakaria O, Madi M, Kasugai S. A novel osteogenesis technique: The expansible guided bone regeneration. J Tissue Eng 2012; 3(1): 2041731412441194.
9.     Trueba Muñoz P, Navarro Pintado C, Rodríguez-Ortiz JA, Beltrán AM, García-García FJ. Fabrication and characterization of superficially modified porous dental implants. Surface and Coatings Technology 2021; 408: 126796.
10.  Dong H, Liu H, Zhou N, Li Q, Yang G, Chen L, et al. Surface modified techniques and emerging functional coating of dental implants. Coatings 2020; 10(11): 1012.
11.  Flink H, Bergdahl M, Tegelberg Å, Rosenblad A, Lagerlöf F. Prevalence of hyposalivation in relation to general health, body mass index and remaining teeth in different age groups of adults. Community Dent Oral Epidemiol 2008; 36(6): 523-31.
12.  Yao Q, Sun J, Fu Y, Tong W, Zhang H. An Evaluation of a Borided Layer Formed on Ti-6Al-4V Alloy by Means of SMAT and Low-Temperature Boriding. Materials (Basel) 2016; 9(12): 993.
13.  Avila G, Misch K, Galindo-Moreno P, Wang H-L. Implant surface treatment using biomimetic agents. Implant Dent 2009; 18(1): 17-26.
14.  Özmeriç N, Çakal GÖ, Gökmenoğlu C, Özmeriç A, Oduncuoğlu BF, Hacaloğlu T, et al. Histomorphometric and biomechanical evaluation of the osseointegration around micro-and nano-level boron-nitride coated titanium dental implants. J Stomatol Oral Maxillofac Surg 2022; 123(6): e694-e700.
15.  Raval A, S. Yadav N, Narwani S, Somkuwar K, Verma V, Almubarak H, et al. Antibacterial efficacy and surface characteristics of boron nitride coated dental implant: An in-vitro study. J Funct Biomater 2023; 14(4): 201.
16.  Van Brakel R, Meijer GJ, Verhoeven JW, Jansen J, De Putter C, Cune MS. Soft tissue response to zirconia and titanium implant abutments: an in vivo within‐subject comparison. J Clin Periodontol 2012; 39(10): 995-1001.
17.  Jamalpour MR, Shahabi S, Baghestani M, Shokri A, Jamshidi S, Khazaei S. Complementarity of surgical therapy, photobiomodulation, A-PRF and L-PRF for management of medication-related osteonecrosis of the jaw (MRONJ): an animal study. BMC Oral Health 2022; 22(1): 241.
18.  Çakal G, Gökmenoğlu C, Kaftanoğlu B, Özmeriç N. Surface characterization and corrosion resistance of boron nitride coated titanium dental implants. Prot Met Phys Chem Surf 2019; 55(3): 608-14.
19.  Lahiri D, Singh V, Benaduce AP, Seal S, Kos L, Agarwal A. Boron nitride nanotube reinforced hydroxyapatite composite: mechanical and tribological performance and in-vitro biocompatibility to osteoblasts. J Mech Behav Biomed Mater 2011; 4(1): 44-56.
20.  Alansy AS, Saeed TA, Al-Attab R, Guo Y, Yang Y, Liu B, et al. Boron nitride nanosheets modified with zinc oxide nanoparticles as novel fillers of dental resin composite. Dent Mater 2022; 38(10): e266-e74.
 
دوره 44، شماره 864
هفته 4، تیر
خرداد و تیر 1405
صفحه 846-853

  • تاریخ دریافت 07 تیر 1405
  • تاریخ پذیرش 21 تیر 1405